When it comes to woodworking industry, we all think of customized diamond saw blade for concrete in china, which is a common equipment in woodworking. So do you know what are the inspection methods for the production process of customized diamond saw blade for concrete in china?

1. Hardness change detection of tooth base after tooth welding of customized diamond saw blade for concrete in china. Three temperatures are selected for the customized diamond saw blade for concrete in china during tooth welding. When the tooth base of the matrix is heated at 650 ℃, the hardness of the matrix remains unchanged. When heating at 750 ℃, the hardness increases by only 3-5 degrees. The hardness has reached 55-58 degrees at 800 degrees, so the matrix teeth are broken during cutting. The influence of different tooth profile or thickness of customized diamond saw blade for concrete in china and the volume of generator is also key.

2. Detection of side front angle and side rear angle of customized diamond saw blade for concrete in china. Many people choose the watch when detecting the side rake angle. When detecting the side rake angle, it is affected by the change of the alloy undercut angle or the change of the alloy length value. When the deformation of the base is added, or it is still not in the central circle, and the point surface contact leaning table is used to measure the lateral front angle, it is only an approximate reference value, not an absolute value. The flank angle is affected by the size and diameter of grinding wheel a and B. And the five different changes of the grinding center line are only a reference value in essence. The rigorous detection still needs the projection camera to be the most accurate.

3. Detection of welding tooth deformation of customized diamond saw blade for concrete in china. The thermal stress or cold tension of materials will change in the process of thermal change. It is mainly caused by many factors, such as material, temperature, cooling time, thickness of workpiece, heating area and so on. According to the cold measurement state of the matrix, the welding teeth will change due to the inevitable factors of the next process. At this time, we will conduct another detection along the recording mark according to the above 6 methods according to the above recorded data, depending on its deformation. From the analysis, we can also see the harm of the welding teeth to the deformation of the matrix.

4. Diameter jump detection of customized diamond saw blade for concrete in china. There are three kinds of strong jump States, the first is 180 degree eccentric height, the second is left high and right bottom or right high and left bottom, and the third is uneven. The first kind of hole matching is too poor, and the matrix aperture is too large, resulting in 180 ° off round height; Second, as long as the base is not the center when grinding the knife, the left and right grinding heads do not grind on one center; The third kind of mechanical accuracy is unreliable, the quality of grinding wheel or uneven arc of grinding wheel.

5. End jump detection of customized diamond saw blade for concrete in china. The elastic deformation of saw blade is mainly caused by the elastic deformation of saw blade base. The mechanical clip is uneven and may bounce, and the coordinates of the tooth pulling claw may be unstable. The micrometer is not allowed to measure the quality of grinding wheel, unevenness, concave convex surface, arc and other factors due to matrix wave or pot shape.