Application method of Discount 350mm diamond saw blade in china
- Categories:350mm diamond saw blade
- Author:
- Origin:
- Time of issue:2022-03-18 20:48
- Views:
(Summary description)Usage of Discount 350mm diamond saw blade in china: 1. Please hang the Discount 350mm diamond saw blade in china vertically on a dry shelf. Be sure to avoid wet places. When cleaning, avoid the use of corrosive solvents. When the saw blade is not used for a long time, clean the grinding, oil it for antirust treatment, and then place it properly in the original carton.
Application method of Discount 350mm diamond saw blade in china
(Summary description)Usage of Discount 350mm diamond saw blade in china:
1. Please hang the Discount 350mm diamond saw blade in china vertically on a dry shelf. Be sure to avoid wet places. When cleaning, avoid the use of corrosive solvents. When the saw blade is not used for a long time, clean the grinding, oil it for antirust treatment, and then place it properly in the original carton.
- Categories:350mm diamond saw blade
- Author:
- Origin:
- Time of issue:2022-03-18 20:48
- Views:
Usage of Discount 350mm diamond saw blade in china:
1. Please hang the Discount 350mm diamond saw blade in china vertically on a dry shelf. Be sure to avoid wet places. When cleaning, avoid the use of corrosive solvents. When the saw blade is not used for a long time, clean the grinding, oil it for antirust treatment, and then place it properly in the original carton.
2.The sawtooth of Discount 350mm diamond saw blade in china is sharp. It is forbidden to collide and fall on the ground. It must be handled with care.
3. When installing Discount 350mm diamond saw blade in china, first confirm the performance and purpose of the saw table, and check whether the alloy saw blade has cracks, distortion, unevenness, tooth loss and other phenomena before installation.
4. After the Discount 350mm diamond saw blade in china is installed, it must be confirmed whether the central hole of the saw blade is firmly fixed on the saw table. The cutting direction indicated by the arrow of 350mm diamond saw blade is aligned with the rotation direction of saw table. It is strictly prohibited to install in the opposite direction, which will lead to tooth loss.
5. After the Discount 350mm diamond saw blade in china is replaced, it needs to be rotated for one minute before use, and then cut when the saw table enters the working state.
6. When cutting materials, the Discount 350mm diamond saw blade in normal operation must be cut into the materials gently, and it is forbidden to press hard.
7. It is forbidden to reverse the Discount 350mm diamond saw blade, which will lead to tooth loss and danger.
8. If you hear abnormal sound, see abnormal shaking and abnormal section, please stop the operation immediately and find out the cause of the abnormality. Replace 350mm diamond saw blade. It is forbidden to stop the saw blade suddenly in the middle of the object to be cut. Stopping in the middle of the cutting object will cause the sawtooth to fall off and the saw blade to deform.
9. After cutting, please wipe anti rust oil in time to prevent the saw blade from rusting. When the sawtooth is not sharp, grind the sawtooth again. You must get the grinding specified by the manufacturer of Discount 350mm diamond saw blade in china to increase the service life of 350mm diamond saw blade.
Scan the QR code to read on your phone
- Business consulting
- Online Message
- Consultation telephone 008615879981540
- Back to the top
WeChat official account
Mobile phone QR code
Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province
Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000
This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang