When using Diamond Wire Saw for Marble Quarrying to mine facing stone, it is also necessary to equip some auxiliary equipment to complete each process in the technological process of Diamond Wire Saw for Marble Quarrying. Auxiliary equipment directly involved include hydraulic drilling machines for drilling, large-diameter pneumatic rock drills, hydraulic drilling machines for pushing and overturning the separated blocks, and pneumatic or hydraulic packs used with hydraulic capping machines. Diamond Wire Saw for Marble Quarrying is used as auxiliary equipment to displace the block material, to lift the block material and to carry the equipment. The car crane, mast crane, crawler crane, etc. are used for displacement to clean up rubble, waste residue and production stripping. Used bulldozers, these equipment can also be replaced with wheeled or crawler front loaders.

When carrying out mine stripping projects for stone mines mined with Diamond Wire Saw for Marble Quarrying, in addition to removing the overburden and the surrounding rocks that are not ore body types, the broken ore sections in the fissures of the weathered ore section should also be removed. Until the fresh and integrally intact ore body bedrock is exposed. In fact, there are many methods of stripping. In addition to the use of bulldozers or excavators and other mechanical equipment, under the principle of ensuring that the ore body is not damaged, conventional blasting methods can also be used to remove surrounding rocks and weathered ore sections. Reasonably select the blasting parameters to prevent the blast surface from damaging the main ore body.
The selection and matching of mining and auxiliary equipment are determined according to the geology and natural conditions of the ore body, the scale of mine production and the development method. After the equipment type and model are determined, Diamond Wire Saw for Marble Quarrying shall be determined according to the production scale.