
Diamond Wire Saw for Marble Quarrying most frequently asked questions
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-07-01 17:34
- Views:
(Summary description)The production of Diamond Wire Saw for Marble Quarrying has a know-how. It has higher requirements than the production of diamond saw blades.
Diamond Wire Saw for Marble Quarrying most frequently asked questions
(Summary description)The production of Diamond Wire Saw for Marble Quarrying has a know-how. It has higher requirements than the production of diamond saw blades.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-07-01 17:34
- Views:
The production of Diamond Wire Saw for Marble Quarrying has a know-how. It has higher requirements than the production of diamond saw blades. Like an endless chain, the production of Diamond Wire Saw for Marble Quarrying consists of many different production processes. If there is a problem in the process, the entire value of Diamond Wire Saw for Marble Quarrying will be compromised.
1. The wire saw can not be cut and used most often is the incorrect selection of diamonds (often too good diamonds are used), carcass, bead spacing, mold design or wrong application parameters. For example, if we choose too high diamond density or too good diamond, its sawing performance is not very good. The diamond will not break easily, making it difficult to produce a new sharp edge.
2. The saw rope is broken. Usually the wrong application parameters are used or the quality of the Diamond Wire Saw for Marble Quarrying is too poor, which means that the bond between the plastic/rubber and the diamond beads is not strong, causing cuttings to enter the diamond saw wire, and soon magma or rock The shavings partly contacted and rubbed the steel rope between the beaded steel body and the steel rope, and the connecting thread of the steel rope began to break. This may also be due to the wrong application of the bonding agent. The wire rope fracture may also be caused by the wrong selection of wire rope, beaded steel body, and poor heat treatment after injection molding.
3. The beads peel off. If part of the bead cutting layer is peeled off from the bead steel body, it is usually because the carcass is improperly selected or the wrong sintering parameters are used. Usually using incorrect cold pressing process is also the cause of spalling. Sometimes, due to improper dewaxing process, paraffin infiltrates between the metal carcass and the beaded steel body. Sometimes the problem is also related to improper cleaning of the beaded steel body.
4. The beaded combination is not strong. The beaded string is loose and the combination is not strong. It is usually a sign of problems during injection molding. It may also be caused by improper selection of steel wire rope, or contamination of the diamond beads and improper cleaning, which will result in a weak bond between the beads and the injection/injection rubber.
Generally speaking, many companies have no experience in this area. Therefore, it will take some time for the strong foundation of Diamond Wire Saw for Marble Quarrying with good sawing functions.
Scan the QR code to read on your phone
- Business consulting
- Online Message
- Consultation telephone 008615879981540
- Back to the top

WeChat official account

Mobile phone QR code
Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province
Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000
This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang