As we all know, customized diamond wire saw mining in china is widely used as a tool for mining, but safety should also be paid attention to when using. These five precautions should be borne in mind:

1. Try to turn off the switching power supply of the power supply system before connecting to the main switching power supply for customized diamond wire saw mining in china.
2. When adjusting the up and down position and orientation of the driving flywheel used in customized diamond wire saw mining in china, be sure to recognize whether there are roadblocks around and whether they will encounter other parts of machinery and equipment. When the driving flywheel is adjusted to the terminal of the up and down position, the adjustment shall be terminated first to prevent damaging the screw nut or damaging the winding resistance of the motor. It is strongly required that the driving flywheel need not be adjusted to the upper and lower terminal positions. Do not turn the drive flywheel vertically upward, otherwise the main motor cable will be damaged.
3. When laser cutting is carried out in customized diamond wire saw mining in china, the supply of cooling circulating water shall be checked frequently. Once the supply of cooling circulating water is not timely, the laser cutting shall be terminated first to prevent the damage of bead rope.
4. It is forbidden to switch off the customized diamond wire saw mining in china.
5. When laser cutting the separated body in customized diamond wire saw mining in china, it must follow the standard of laser cutting the sea level first and then the vertical plane. In the whole process of laser cutting at sea level, the wedge of support plate should be added to the SAW seam that has been cut by laser immediately Avoid falling part of the rock layer and pressing the bead rope, resulting in bead rope declaration and safety accidents When necessary, the wedge support plate can be inserted into the vertical sawing seam to separate the body.