Now the tools used by woodworking are becoming more and more advanced. Among them, 350mm diamond saw blade is one of them. However, there are many brands of 350mm diamond saw blade on the market with different quality. Do you know how to choose a higher quality 350mm diamond saw blade? 
Choose the brand of 350mm diamond saw blade. From the economic aspect, if conditions permit, you can choose the top ten imported brands. The specific brands are not explained in some details, but you can find them on Baidu. If you are new to the industry, you can choose several domestic brands.

Choose the level of 350mm diamond saw blade. The same brand saw blades are classified. Normally, industrial grade, professional grade, and general grade. It is recommended to choose professional grade and industrial grade 350mm diamond saw blade products.
From the tooth profile, it is recommended to use the left and right flat teeth or the ladder flat teeth if the material is cut. If the cutting board is used for cutting, it is recommended to use the left and right teeth, which will cut the material faster. If it is used for grooving, it can be used. The flat teeth are slotted out and the bottom of the slot is flat.
In terms of the number of teeth: the denser the number of teeth, the smoother the cutting surface, but the slower the cutting speed, the thinner the number of teeth, the rougher the cutting surface, but the faster the cutting speed.
Choose from the quality aspect: 350mm diamond saw blade steel plate must reach a certain hardness to prevent deformation during high-speed operation, the tooth surface must be flat, to ensure that the saw road is close to the tooth width, the alloy tooth material must be hard, and the welding is strong, so as not to be used during application. The alloy teeth fall off, causing safety hazards.
The above points can help you choose a good 350mm diamond saw blade product. Only when the quality is good, you can use it at ease. I hope this article can help you.