
Instructions for customized diamond wire saw china
- Categories:diamond wire saw for stone cutting
- Author:
- Origin:
- Time of issue:2022-02-18 18:54
- Views:
(Summary description)Customized diamond wire saw china is suitable for cutting reinforced concrete, stone and other materials. Operation specification for diamond wire saw: 1. When in use, straighten the customized diamond rope saw and twist it according to 1-2 turns / m, which can effectively prevent eccentric wear, and then connect the rope saw into a closed loop with hydraulic pliers and buckle. Before cutting, be sure to distinguish the use direction of customized diamond rope saw china, and do not rotate the cutting in the opposite direction. 2. During the use of customized diamond rope saw china, sharp angle cutting shall be avoided as far as possible to avoid damage to the rope. If necessary, support guide wheels shall be added.
Instructions for customized diamond wire saw china
(Summary description)Customized diamond wire saw china is suitable for cutting reinforced concrete, stone and other materials.
Operation specification for diamond wire saw:
1. When in use, straighten the customized diamond rope saw and twist it according to 1-2 turns / m, which can effectively prevent eccentric wear, and then connect the rope saw into a closed loop with hydraulic pliers and buckle. Before cutting, be sure to distinguish the use direction of customized diamond rope saw china, and do not rotate the cutting in the opposite direction.
2. During the use of customized diamond rope saw china, sharp angle cutting shall be avoided as far as possible to avoid damage to the rope. If necessary, support guide wheels shall be added.
- Categories:diamond wire saw for stone cutting
- Author:
- Origin:
- Time of issue:2022-02-18 18:54
- Views:
Customized diamond wire saw china is suitable for cutting reinforced concrete, stone and other materials.
Operation specification for diamond wire saw:
1. When in use, straighten the customized diamond rope saw and twist it according to 1-2 turns / m, which can effectively prevent eccentric wear, and then connect the rope saw into a closed loop with hydraulic pliers and buckle. Before cutting, be sure to distinguish the use direction of customized diamond rope saw china, and do not rotate the cutting in the opposite direction.
2. During the use of customized diamond rope saw china, sharp angle cutting shall be avoided as far as possible to avoid damage to the rope. If necessary, support guide wheels shall be added.
3. The wear of the guide wheel will reduce the coincidence between the customized diamond rope saw china and the guide wheel, affect the wire speed of the rope saw, and then affect the cutting efficiency. It is necessary to replace the rubber ring of the guide wheel in time.
4. The customized diamond wire saw china must be cooled during cutting, and the water volume can be adjusted according to the noise during cutting and the turbidity of cooling water. The more cooling water is not the better. Too much cooling water is easy to affect the self sharpening of diamond rope saw and make the rope saw slip; Too little cooling water is easy to heat the beads and affect the cutting life.
5. Pay attention to ensure the tension of customized diamond rope saw china. The tension is too small, the cutting speed is slow, and it is easy to take off the rope; If the tension is too large, the diamond rope saw will wear quickly, and there is a risk of rope breaking at the connection.
6. When the diamond wire saw is not in use, the tension should be unloaded and stored in a dry place.
Safe operation specification for diamond wire saw:
1. All diamond wire saw equipment shall comply with national or relevant standards.
2. There must be safety isolation facilities and personal protection measures around the diamond rope saw working face on the construction site before construction.
3. Under the working condition of china diamond wire saw products, personnel must be 15 meters away from the working surface. Personnel are strictly prohibited to stay in the tangent area of the running direction of wire saw; If on-site maintenance is required, it must be operated after shutdown.
4. During the use of customized diamond rope saw products, it is normal for some beads to become loose due to wear, impact, etc. after a cutting operation, the product state must be checked, and the loose parts of beads must be cut down, or the product shall be stopped.
Scan the QR code to read on your phone
- Business consulting
- Online Message
- Consultation telephone 008615879981540
- Back to the top

WeChat official account

Mobile phone QR code
Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province
Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000
This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang