Customized diamond wire saw rope in china is a cutting tool that needs wire cutting for cutting or processing materials. At present, it has been widely used to cut all kinds of metal and non-metallic composite materials, such as metal, steel, marble, stone, steel bar, concrete block, ceramics, glass, rock, gem, jade, meteorite biological and bionic composite materials. Customized diamond wire saw rope in china is especially suitable for cutting high hardness, high value Various brittle crystals that are easily broken.

If the customized diamond wire saw rope in china is to complete the cutting function, it should also be based on correct operation. The operating procedures of customized diamond wire saw rope in china are as follows:

First of all, when novices operate, they must remember that different types of customized diamond wire saw rope in china cannot be connected into one rope, because this will vibrate and collide the rope and break the rope. If they are all of the same kind connected together, but connecting a new one with some used ones will also produce the adverse consequences mentioned above.

Before using customized diamond wire saw rope in china, we should first check and confirm whether the motor and cable are normal, the protective grounding is good, the protective device is safe and effective, and the selection of saw blade should meet the requirements and be installed correctly. In addition, after the official start-up, it should run without load, check and confirm whether the operation direction of the saw blade is correct, the lifting mechanism is flexible, there is no abnormality and abnormal noise in the operation, and the operation can be carried out only after everything is normal.

In addition, it is strictly forbidden for operators to wear gloves during operation. They should use special tools for feeding and cannot push materials directly by hand. During the operation, when the workpiece has impact, runout and abnormal sound, it should be stopped immediately for inspection. After troubleshooting, it can continue the operation. In addition, it is strictly prohibited to inspect and repair all parts during operation. After each operation, clean the body of the customized diamond wire saw rope in china, wipe the saw blade, drain the residual water from the water tank, recover the cable and store it in a dry and ventilated place.