language
中国
韩国
韩国
韩国
韩国
韩国
banner

Problems needing attention in the use of Wholesale 350mm diamond saw blade on sales

(Summary description)The use of Wholesale 350mm diamond saw blade on sales is becoming more and more common, but many people are not clear about the use rules of Wholesale 350mm diamond saw blade on sales. In fact, we need to pay attention to many problems when using Wholesale 350mm diamond saw blade on sales, mainly in the following aspects:

Problems needing attention in the use of Wholesale 350mm diamond saw blade on sales

(Summary description)The use of Wholesale 350mm diamond saw blade on sales is becoming more and more common, but many people are not clear about the use rules of Wholesale 350mm diamond saw blade on sales. In fact, we need to pay attention to many problems when using Wholesale 350mm diamond saw blade on sales, mainly in the following aspects:

Information

The use of Wholesale 350mm diamond saw blade on sales is becoming more and more common, but many people are not clear about the use rules of Wholesale 350mm diamond saw blade on sales. In fact, we need to pay attention to many problems when using Wholesale 350mm diamond saw blade on sales, mainly in the following aspects:

1. Please hang the Wholesale 350mm diamond saw blade on sales vertically on a dry shelf. Be sure to avoid wet places. Never put the 350mm diamond saw blade flat on the ground or on the shelf, which will cause the deformation of the alloy saw blade.

2. When using Wholesale 350mm diamond saw blade on sales, do not exceed the specified maximum speed.

3. When using Wholesale 350mm diamond saw blade on sales, you must wear protective cover, gloves, safety helmet, labor protection shoes and protective glasses.

4. When installing Wholesale 350mm diamond saw blade on sales, the performance and purpose of the saw table must be confirmed first, and it is best to read the manual of the saw table first. In order to avoid accidents caused by wrong installation.

5. When installing Wholesale 350mm diamond saw blade on sales, the alloy saw blade must be checked for crack, distortion, leveling, tooth loss and other phenomena before installation.

6.The saw teeth of the Wholesale 350mm diamond saw blade on sales are extremely hard and sharp. It is forbidden to collide or fall on the ground and must be handled with care.

7. After the Wholesale 350mm diamond saw blade on sales is installed, it must be confirmed whether the central hole of the saw blade is firmly fixed on the flange of the saw table. If there is a gasket, the gasket ring must be well covered; Then, gently push the saw blade by hand to confirm whether the saw blade rotates eccentrically and shakes. The diameter of the flange plate shall be suitable for the saw blade, and the size shall be slightly larger than 1 / 3 of the diameter of the saw blade. The flange plate with 1 / 2 of the diameter of the saw blade shall be used for the thin blade, and the sawing effect is better;

8. The cutting direction indicated by the arrow of Wholesale 350mm diamond saw blade on sales must be aligned with the rotation direction of the saw table. It is strictly prohibited to install in the opposite direction, which will lead to tooth loss.

9. Pre rotation time: after replacing the Wholesale 350mm diamond saw blade on sales, it needs to be pre rotated for one minute before use, and the cutting can be carried out only when the saw table enters the working state.

10. After the Wholesale 350mm diamond saw blade on sales is used for many times, the sawtooth of the saw blade shall be cleaned, and the resin, sawdust and other sundries attached to both sides of the sawtooth shall be removed, otherwise it will have a great impact on the processing effect of the saw blade;

11. When storing Wholesale 350mm diamond saw blade on sales, the saw blades shall not be stacked together, and the 350mm diamond saw blades shall be placed in the original carton;

The above points are the problems we should pay attention to when using Wholesale 350mm diamond saw blade on sales. Therefore, we must be careful when using Wholesale 350mm diamond saw blade on sales.

Keyword:

Scan the QR code to read on your phone

Xinguang Diamond

WeChat official account

Xinguang Diamond

Mobile phone QR code

Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province

Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000

This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang