Although the Discount cutter diamond saw blade on sales is so-called superhard tool, sometimes the Discount cutter diamond saw blade on sales is easily damaged. Generally, the damage of the Discount cutter diamond saw blade on sales is caused by the shape and material of the part, the shape and material of the tool, the processing conditions and the grinding of the blade.

When the material to be cut is strongly bonded on the surface of the Discount cutter diamond saw blade on sales, a knife is cut off, and the Discount cutter diamond saw blade on sales is easily damaged.

The basic properties of the processed material that affect the abrasion and diffusion wear of the Discount cutter diamond saw blade on sales are high temperature yield stress, hard impurities and the solubility of carbides in the material; Hard particles can scratch the contact surface.

The Discount cutter diamond saw blade on sales of brittle cutting tool is easy to cause blade collapse under the action of thermal load and mechanical load cycle.

Most of the damage of the Discount cutter diamond saw blade on sales occurs at the end of the cutting. The chip is suddenly unloaded to the end of the cutting tool, and the workpiece material is suddenly broken, so the stored elastic energy is suddenly released to cause the damage of the Discount cutter diamond saw blade on sales.

Therefore, the cutting angle of the workpiece has a great impact on the damage of the Discount cutter diamond saw blade on sales. The cutting angle above 75 can prevent the damage.

In addition, the wear and collapse of the Discount cutter diamond saw blade on sales are affected by the vibration of the tool. When the rigidity of the machine tool and the cutting system is insufficient or the cutting amount is too large, all the cutting depth will cause the vibration of the tool and increase the possibility of damage of the Discount cutter diamond saw blade on sales. The overheating of the Discount cutter diamond saw blade on sales will cause burning loss.

In order to prevent the damage of cutter diamond saw blade, many manufacturers at home and abroad generally adopt the following corresponding measures:

1. Since the coated blades such as Discount cutter diamond saw blade on sales, CBN blade, high-speed steel blade, cemented carbide blade, cermet, ceramic and other tool materials have their own characteristics, appropriate tool materials shall be reasonably selected according to workpiece materials, cutting conditions and other factors, and materials with high strength and wear resistance shall be used as much as possible.

2. Since the Discount cutter diamond saw blade on sales of various tools have different characteristics in the external dimension, the arc angle of the tool tip, the type of chip breaking groove and the type of the tool bar, appropriate types of tools and tool bars should be selected according to the processing content, workpiece material, cutting conditions, rigidity, accuracy and operating performance, so as to give full play to the cutting efficiency and ensure the shape and size of the tool, It is an important condition to ensure machining accuracy that geometric parameters conform to relevant standards and regulations.

3. The wear and replacement cycle of the Discount cutter diamond saw blade on sales should be clearly specified, which is particularly important for the indexing tool.

4. Pay attention to the installation accuracy of the tool tip, and select a reasonable clamping mode and clamping mechanism to ensure good operation and processing performance and tool tip accuracy, and facilitate chip removal.

5. Taking into account the properties of the material to be processed, the shape and material of the Discount cutter diamond saw blade on sales, the cutting conditions and the performance of the machine tool and other factors, the best measures such as chip breaking, chip removal and chip cleaning can be adopted. A chip breaking groove can be reasonably added to prevent the chips from winding the tool and the workpiece, affecting the quality, adding the operator's safety hazards and reasonably breaking the chips, which not only ensures the product quality but also increases the blade life.

6. To strengthen the scientific management of Discount cutter diamond saw blade on sales, first of all, the use of cutter diamond saw blade, such as the actual life of tool diamond saw blades, damage, tools with insufficient or excessive circulation and other special conditions, shall be statistically processed and analyzed, so as to find out and judge the reasons for the reduction of cutting efficiency of cutter diamond saw blade and take remedial measures. For this purpose, a tool file can be established, which includes columns such as tool number, manufacturing date, general cutting conditions and usage.

Secondly, reasonable purchase plan, consumption quota and scrapping standard of Discount cutter diamond saw blade on sales shall be formulated and strictly implemented. Meanwhile, complete inspection regulations shall be formulated to strengthen the inspection of Discount cutter diamond saw blade on sales during purchase, after regrinding and after installation.

7. In addition, it is also necessary to pay attention to the protection of the tip of the diamond saw blade during use, and clean and maintain it after use.

Discount cutter diamond saw blade on sales of the lost tool shall be repaired reasonably, and the blade shall not be reground. After the blade is worn, it is often grinded to a smaller size for reuse. The damaged tool bar is usually repaired and reused