language
中国
韩国
韩国
韩国
韩国
韩国
banner

The 350mm diamond saw blade manufacturer will show you: What are the factors affecting the working conditions of diamond saw blades

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-08-06 10:19
  • Views:

(Summary description)The manufacturer of 350mm diamond saw blade tells you that the commonly used diamond grain size is in the range of 30/35 to 60/80. The harder the rock, the finer grain size should be selected.

The 350mm diamond saw blade manufacturer will show you: What are the factors affecting the working conditions of diamond saw blades

(Summary description)The manufacturer of 350mm diamond saw blade tells you that the commonly used diamond grain size is in the range of 30/35 to 60/80. The harder the rock, the finer grain size should be selected.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-08-06 10:19
  • Views:
Information

The manufacturer of 350mm diamond saw blade tells you that the commonly used diamond grain size is in the range of 30/35 to 60/80. The harder the rock, the finer grain size should be selected. The manufacturer of 350mm diamond saw blade tells you that because under the same pressure, the finer the diamond, the sharper it is, which is good for cutting into hard rocks.

customized 350mm diamond saw blade on sales
The manufacturer of 350mm diamond saw blade tells you that the so-called diamond concentration refers to the density of diamonds distributed in the matrix of the working layer (that is, the weight of diamonds per unit area). Generally speaking, the higher the hardness of the binder, the stronger its wear resistance. Therefore, when sawing abrasive rocks, the bond hardness should be high; when sawing soft rocks, the bond hardness should be low; when sawing abrasive and hard rocks, the bond hardness should be moderate .
The manufacturer of 350mm diamond saw blade tells you that the diamond circular saw blade will be subjected to alternating loads such as centrifugal force, sawing force, and sawing heat during the process of cutting stone. The manufacturer of 350mm diamond saw blade tells you that the diamond circular saw blade is worn and damaged due to the force effect and the temperature effect.
Force effect: The 350mm diamond saw blade manufacturer tells you that during the sawing process, the saw blade is subject to axial and tangential forces. The manufacturer of 350mm diamond saw blade tells you that due to the force in the circumferential and radial directions, the saw blade is wavy in the axial direction and dish-shaped in the radial direction. The manufacturer of 350mm diamond saw blade tells you that these two kinds of deformation will cause uneven rock cutting surface, a lot of waste of stone, high noise during sawing, and increased vibration, which will cause early damage to diamond agglomeration and reduce the life of the saw blade.
The manufacturer of 350mm diamond saw blade tells you that no matter what kind of wear is closely related to the load and temperature borne by the diamond particles. Both of these depend on the sawing process and cooling and lubrication conditions.

Keyword:

Scan the QR code to read on your phone

Xinguang Diamond

WeChat official account

Xinguang Diamond

Mobile phone QR code

Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province

Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000

This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang