When it comes to diamond saw blades, 350mm diamond saw blade manufacturers believe that everyone is familiar with it, especially hard diamond saw blades, which are common wooden tools. So do you know what are the requirements for the installation of hard diamond saw blades?
basic requirements:

The 1.350mm diamond saw blade manufacturer tells you that you need to choose the appropriate saw blade according to the design requirements of the equipment.
2. The equipped equipment should be equipped with safety protection devices, such as: protective cover, power-off brake, overload protection, etc.
3. There are professional operators to install and use, and wear work clothes, protective goggles, earmuffs, etc.
4. Operators should not wear gloves, long hair should be placed in the work cap, and pay attention to ties and cuffs to prevent danger.
The manufacturer of the 5.350mm diamond saw blade tells you to stay away from fire and humid environments.
Installation requirements:
1. The equipment is in good condition, the main shaft has no deformation, no diameter jump, firm installation and fixation, no vibration, etc.
2. Check whether the saw blade is damaged, whether the tooth profile is complete, whether the saw board is smooth and clean, and whether there are other abnormal phenomena to ensure safe use.
3. When assembling, make sure that the arrow direction of the saw blade is consistent with the rotation direction of the equipment spindle.
4. The manufacturer of 350mm diamond saw blade tells you to keep the axis, chuck and flange clean when installing the saw blade. The inner diameter of the flange is consistent with the inner diameter of the saw blade to ensure that the flange and the saw blade are tightly integrated and positioned properly. Pin and tighten the nut. The manufacturer of 350mm diamond saw blade tells you that the size of the flange should be appropriate, and the outer diameter should not be less than 1/3 of the diameter of the saw blade.