The manufacturer of 350mm diamond saw blade tells you that diamond saw blades include small saw blades, medium-diameter saw blades and large-diameter saw blades.

1. Small saw blade
The manufacturer of 350mm diamond saw blade tells you that it is customary to call diamond saw blades with a diameter of Φ230mm (9″) and below as small saw blades. From the perspective of shape and structure, small saw blades have two types of abrasive layers: continuous type and divided tooth type. In the continuous type, there are integral edges (planar type, The continuous Rim Blade), turbines (coarse teeth, fine teeth, and further, reinforced type, corrugated base type. The Turbo Blade); split teeth structure has split teeth (Plane type, furthermore, reinforced type. The Segmented Type Blade), semi-continuous split teeth (rooted abrasive layer connected), turbine type split teeth. The 350mm diamond saw blade manufacturer tells you that the so-called reinforced type refers to a part of the abrasive layer Deep into the substrate, when such a saw blade cuts strong abrasive materials, due to the abrasive layer that penetrates into the substrate for protection, the substrate is not easy to be thinned and deformed. At the same time, it is equivalent to widening the abrasive layer. Play the role of strengthening cutting and improving life;
The manufacturer of 350mm diamond saw blade tells you that small saw blades are mainly installed on hand-held or semi-automatic cutting machines. They are widely used in construction, decoration and other occasions. They can cut stone plates, floor tiles, ceramics, glass, concrete, etc. The manufacturer of 350mm diamond saw blade tells you that the full edge saw blade is suitable for wet cutting and engraving, and the split tooth and turbine saw blades can be used for dry cutting.
2. Medium and large diameter saw blades
The manufacturer of 350mm diamond saw blade tells you that generally, diamond saw blades with a diameter of ￠250～750mm are called medium-diameter saw blades, and those with a diameter of ￠800mm and above are called large saw blades.
The manufacturer of 350mm diamond saw blade tells you that the medium diameter diamond saw blade is mainly used for cutting edges, corners or grooving of stone and other plates. It is also used for high-density refractory materials, high-voltage electric porcelain bottles, concrete pavements, asphalt pavement expansion joints, and airplanes. Cutting of runway non-slip grooves, wall materials, cement floor slabs, electrical insulation materials, etc. Pitch saw blades are mostly used on small bridge cutting machines (hydraulic or manual), and mobile cutting (such as road expansion joint cutting) are mostly hand-held cutting machines.
The manufacturer of 350mm diamond saw blade tells you that the large saw blade is mainly used to cut the mined stone into plates. ￠The large saw blades above 2000mm are mostly used for the shaping of irregular blocks and the cutting of plates. The manufacturer of 350mm diamond saw blade tells you that large saw blades are mostly used on two-way cutting machines, desktop cutting machines, and large bridge hydraulic cutting machines; there are also a group of large saw blades of the same diameter or two groups of different diameters for cutting plates in groups, which is obvious Improve the efficiency, the plate can be processed thinner, lighter, and the stone utilization rate is higher. Of course, the group use has higher requirements on the quality of the saw blade, the power of the saw, the rigidity, the precision, and the cooling condition.