The manufacturer of Diamond segment for sandstone cutting tells you that there is a special kind of stone in nature, with quartz sand as the main component. After the passage of time, before a stronger granite is formed, it exists in the form of sandstone. The manufacturer of Diamond segment for sandstone cutting tells you Your stone has obvious granular gravel surface, the hardness is softer than granite, the stability and water absorption are not as good as granite, the color difference is also very obvious, but most of this kind of stone has its own characteristics, such as giving people a kind of desert. Years, golden color, and hot feeling, in terms of exterior walls, it is not afraid of weathering and rain, so whether as exterior walls or background walls, sculptures, etc., it can give people a high-end visual sense.

The cutter head for cutting sandstone is very difficult, mainly due to the following three reasons:
The first point is that the diamond segment for sandstone cutting manufacturer tells you that the formation period of sandstone is very long, so the span is very large, and the hardness is the most obvious. The Mohs hardness is between 4-8, so the cutting requirements are very high. Generally speaking, it is necessary to carry out a detailed analysis according to the local sandstone hardness, and then carry out a special adjustment to obtain a better applicable cutter head product.
The second point is that the main component of sandstone is quartz sand. The manufacturer of Diamond segment for sandstone cutting tells you that during the cutting process, if the blade is not sharp enough, it is easy to have edges, missing corners, and unequal board surfaces. Therefore, the sharpness of the large sandstone cutter head must be adjusted accurately during the design process.
Thirdly, the manufacturer of Diamond segment for sandstone cutting tells you that during the cutting process of sandstone, the quartz sand will automatically pop up, and the flying sand will continue to hit the double walls of the side of the stone, and then fall, causing difficulty in chip removal and the need for secondary cutting. .
There are other problems, such as increased lifespan, blade sharpening, etc., which are all factors that affect the design of sandstone cutter heads. In short, sandstone cutter heads are not stored abundantly in nature, but processing is difficult, and good cutter heads are difficult to find. This is a common situation faced by stone manufacturers.
The manufacturer of Diamond segment for sandstone cutting tells you that for this kind of hard-to-find sandstone cutter head, in the research, the law of the wire cutting movement in the sandstone cutting process has been discovered. Through data modeling and long-term continuous testing, a new type has been developed. A new type of diamond segment for sandstone cutting. The manufacturer of Diamond segment for sandstone cutting tells you that in terms of cutting efficiency, we have improved the diamond powder with a uniform particle size and replaced it with diamond particles combined with large and small particles. Although the stability has been reduced, But because our carcass binder adopts a special process, the manufacturer of Diamond segment for sandstone cutting tells you that in practical applications, diamond powders of large and small particles perform their own duties. The large one is used for breaking and cutting, and the small one is used for normal cutting. Grinding, so that the sandstone cutter head faces different cutting conditions and materials can be processed.