The manufacturer of diamond wire saw quarry tells you that the diamond wire saw can also be called diamond wire. The wire saw is a tool for cutting blocks, curved slabs, mines, thick concrete, slab stone, irregular concrete steel bars, bridges and roads. It has the functions of easy installation, flexible use, horizontal cutting and vertical cutting. What should I do if the rope breaks when using a diamond wire saw? The manufacturer of diamond wire saw quarry tells you that we will find the reason first, and then deal with it.

There are two ways to break the rope:
(1) Breaking at both ends of the joint from the place where the buckle is pressed is called joint break;
(2) Broken parts in the middle of the wire rope other than the joint, referred to as broken rope.
Analysis of the reasons for the broken rope:
1. Due to the machine, the wire saw is not running smoothly and frequently shakes, which will easily lead to the middle rope break and frequent joint breakage;
2. One-sided pursuit of cutting efficiency and forced cutting, resulting in excessive tension of the wire saw and excessive arc of operation, which in turn causes the wire rope to break;
3. If the joint is crimped too tightly, it will increase the damage of the wire rope and cause the wire rope at the joint to break prematurely;
4. The diamond wire saw quarry manufacturer tells you that after a certain period of time, some cooling water and chips will be injected between the plastic and the steel wire rope. If the parking time is too long, the wire rope will rust and become brittle, and the middle of the wire rope will break prematurely;
5. The diamond wire saw quarry manufacturer tells you that due to the manufacturer’s reasons, the beads are not firmly fixed, and the beads rotate or move. After the beads are rotated, the wire rope will be broken in a short time, and the broken wire rope will be exposed and lost protection after moving, and the wire rope will be broken in advance.
The solution to the broken rope:
1. The diamond wire saw quarry manufacturer tells you to withhold moderately to reduce the damage of the wire rope;
2. The diamond wire saw quarry manufacturer tells you to reduce the amount of cutting and adjust to a moderate amount;
3. Do not park the used wire saw for a long time, such as more than half a year;
4. Choose high-precision machines and maintain them during use to ensure machine performance, increase the smoothness of the wire saw, and reduce jitter;
5. Stabilize the quality of injection molding to ensure that there is no rotation and movement of the beads. The manufacturer of diamond wire saw quarry tells you that the wire saw should be checked in time after a period of time after cutting. If the beads rotate occasionally, they should be broken by hammering.