Wholesale cutter diamond saw blade supplier china has been very mature in processing traditional aluminum profiles. With the improvement of the quality of cemented carbide saw blades for doors and windows, there is a close relationship between the quality of processed products. The correct and reasonable selection of Wholesale cutter diamond saw blade supplier china is of great significance to improve product quality, shorten machining cycle and reduce machining cost. Wholesale cutter diamond saw blade contains many parameters, such as the type of the alloy cutter head, the material of the matrix, the diameter, the number of teeth, the thickness, the tooth shape, the angle, the aperture and so on. These parameters determine the processing capacity and cutting performance of the saw blade. When selecting the Wholesale cutter diamond saw blade supplier china, the saw blade shall be correctly selected according to the type, thickness, cutting speed, cutting direction, feeding speed and saw path width of the sawing material.

The commonly used tooth shapes of Wholesale cutter diamond saw blade supplier china include left and right teeth (alternate teeth), flat teeth, ladder flat teeth (high and low teeth), inverted trapezoidal teeth (inverted conical teeth), dovetail teeth (hump teeth), and rare industrial three left and one right, left and right flat teeth.

1. The left and right teeth of Wholesale cutter diamond saw blade supplier china most widely used, with fast cutting speed and relatively simple grinding. It is suitable for cutting and cross sawing various soft and hard solid wood profiles, density boards, multilayer boards, particleboards, etc. The left and right teeth equipped with anti rebound protection teeth are dovetail teeth, which are suitable for longitudinal cutting of various boards with knots; The left and right tooth saw blades with negative rake angle are usually used for panel sawing due to their sharp teeth and good sawing quality.

2. the flat tooth saw edge of the Wholesale cutter diamond saw blade supplier china is rough, the cutting speed is slow, and the grinding is the simplest. It is mainly used for sawing ordinary wood with low cost. It is mostly used for aluminum saw blade with small diameter to reduce adhesion during cutting, or for slotting saw blade to keep the groove bottom flat.

3. Wholesale cutter diamond saw blade supplier china ladder flat teeth are a combination of trapezoidal teeth and flat teeth, and the grinding is relatively complex. During sawing, the phenomenon of veneer cracking can be reduced, which is suitable for sawing of various single and double veneer wood-based panels and fire-proof panels. Aluminum saw blade in order to prevent adhesion, it also uses the saw blade with a large number of flat teeth.

4. the reverse ladder tooth of Wholesale cutter diamond saw blade supplier china is often used in the bottom groove saw blade of the panel saw. When sawing the wood-based panel with double veneers, the groove saw adjusts the thickness to complete the slotting of the bottom surface, and then the main saw completes the sawing of the panel to prevent edge collapse.