Any object will have a certain degree of wear after use, and the 350mm diamond saw blade is no exception. However, many people often don't know the wear performance of 350mm diamond saw blade, so the wear of 350mm diamond saw blade can not be found early.

From the perspective of resource utilization, the damaged 350mm diamond saw blade is also a misplaced and usable resource.
At present, the reuse of damaged saw blades mainly focuses on prolonging the service life of saw blades through saw blade grinding, and the second is to recycle damaged saw blades as waste boards.
Of course, the grinding of the saw blade is not a hand-to-hand removal. In many 350mm diamond saw blade damage performance, it is often difficult to repair the cracking of the saw blade substrate by grinding.
For the common wear and tear of 350mm diamond saw blade, our most common wear performance is the following: cracking of the saw blade substrate, scratches on the surface of the substrate, wear of the saw blade teeth (including tooth loss), and gear seat Wear and tear.
Among the many external performances of 350mm diamond saw blade wear, there is no doubt that matrix cracking is often the most deadly. Because the substrate is the foundation of the saw blade, once the "foundation" is not strong, the result will be "the ground shakes and the mountains shake". As for the guarantee of the sawing effect, it is even more "a fantasy".
For this reason, for saw blade grinding, many saw blade manufacturers often conduct a visual inspection of the wear of the damaged 350mm diamond saw blade before they formally take over the damaged saw blade, or obtain information about the wear of the saw blade through voice communication. condition.
After a preliminary understanding of the wear of the saw blade, the saw blade manufacturer will officially take over the saw blade and grind the worn saw blade.
At the same time, there is often a principle for saw blade grinding, that is, the cost of saw blade grinding must be lower than the cost of introducing a new saw blade, otherwise it will be counterproductive.
Of course, the current cost of single-blade grinding is still controllable, and is significantly lower than the cost of introducing new saw blades. However, the grinding effect in the actual grinding process varies from plant to plant.
Manufacturers specializing in saw blade grinding will show excellent performance in terms of the reserve of technicians and the technical level of grinding equipment.
Among them, we take the equipment for saw blade grinding as an example. At present, the equipment with the best grinding effect is often from abroad, and the grinding equipment from Germany is the benchmark in the industry for grinding saw blades.
The above is the wear knowledge of 350mm diamond saw blade. Find the problem early and solve it early, so that the use effect is more secure.