Electric wire saw machine static cutting, non-destructive cutting technology, also known as non-destructive cutting and demolition technology, Diamond Wire Saw for Marble Quarrying energy cutting and demolition is an environmentally friendly, efficient and safe new static cutting and demolition construction method developed in recent years . Electric reinforced concrete cutting machine (Diamond Wire Saw for Marble Quarrying) is specially designed for cutting and separating large reinforced concrete structures. Wire Saw for Marble Quarrying/diamond beaded rope) runs around the object to be cut. Under the action of a certain tensile force, it grinds the object to be cut at a high speed, and the generated grinding debris and heat are taken away by the cooling water, resulting in separation of the object to be cut. the goal of.

Before using Diamond Wire Saw for Marble Quarrying for cutting, the operator must receive professional training from the electric wire saw manufacturer. There are several key points during construction that require special attention from the construction unit. Then let everyone know, what are the precautions for Diamond Wire Saw for Marble Quarrying cutting?
1. Start the Diamond Wire Saw for Marble Quarrying electric motor, adjust the driving wheel lifting tension through the control panel, ensure that the diamond bead rope is properly tightened, and supply circulating cooling water, and then start the large electric motor to drive the driving wheel to drive the diamond rope to rotate and cut. During the cutting process of the electric wire saw, the stability of the machine base must be closely observed, and the deviation of the guide wheel must be adjusted at any time to ensure that the cutting rope of the concrete wire saw is in the same plane.
2. During the diamond beaded rope cutting process, the Diamond Wire Saw for Marble Quarrying must be protected by a safety fence in front of the movement direction, and safety signs should be set up in a certain area to remind pedestrians not to enter the construction work area.
3. Enough flushing fluid should be ensured during the cutting process of the concrete wire saw to ensure the cooling of the diamond beaded rope and take away the grinding dust. The remote control wire saw cutting operation achieves stable speed, stable parameters and stable equipment.
4. The safety protection measures of the diamond bead wire saw must be strict and rigorous, otherwise the diamond beads on the broken diamond rope will fly out like bullets and injure people. Therefore, in addition to taking necessary protective measures at the scene, all irrelevant personnel are not allowed to observe.
When choosing the Diamond Wire Saw for Marble Quarrying cutting process type, the construction staff should consider from many aspects and choose the appropriate construction tool.