In recent years, it is a new type of wire saw demolition and non-destructive cutting technology, which is also known as the safe and non-destructive wire saw demolition and static cutting technology. The electric reinforced concrete cutting machine (diamond wire saw) is specially designed for cutting and separating large reinforced concrete structures. The main principle of the electric wire saw machine is to drive the steel wire rope with Diamond Beads (diamond saw rope / diamond bead rope) around the cut object at high speed through the electric roller motor. Under the action of a certain tension, When the cutting object is grinded at high speed, the grinding debris and heat generated are taken away by the cooling water. As a result, the purpose of separating the cutting object is achieved.

Before using Wholesale diamond wire saw for cutting, operators must receive professional training from diamond wire saw manufacturers. During construction, several key points also need special attention of the construction unit.Wholesale Diamond wire saw manufacturers will take you to know what precautions are there for Wholesale diamond wire saw cutting?
1. Start the small electric motor of the Wholesale diamond wire saw, adjust the tension of the driving wheel through the control panel, ensure that the diamond bead rope is properly tightened, supply circulating cooling water, and then start the large motor to drive the driving wheel to drive the diamond rope to rotate and cut. During the cutting process of the electric rope saw, the stability of the base must be closely observed and the offset of the guide wheel must be adjusted at any time to ensure that the cutting rope of the concrete rope saw is in the same plane.
2. During the cutting process of Wholesale diamond wire saw, the front of the moving direction of diamond saw rope must be protected with safety fence, and safety signs shall be set in a certain area to remind pedestrians not to enter the construction area.
3. During the cutting process of concrete rope saw, sufficient flushing fluid shall be ensured to ensure the cooling of diamond bead rope and take away the ground powder. The cutting operation of remote control rope saw shall ensure stable speed, parameters and equipment.
4. The safety protection measures of Wholesale diamond wire saw machine must be strict and tight, otherwise the diamond beads on the broken diamond rope will fly out like bullets and hurt people. Therefore, in addition to taking necessary protective measures, irrelevant personnel are not allowed to observe the scene.
When choosing the cutting process type of Wholesale diamond wire saw, the construction personnel should consider from many aspects and choose the appropriate construction tools.