
diamond segment for granite cutting
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-11-08 11:36
- Views:
(Summary description)The manufacturer of diamond segment for granite cutting today is going to talk about the guide for the cutting edge of diamond saw blades, hoping to help everyone.
diamond segment for granite cutting
(Summary description)The manufacturer of diamond segment for granite cutting today is going to talk about the guide for the cutting edge of diamond saw blades, hoping to help everyone.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2021-11-08 11:36
- Views:
The manufacturer of diamond segment for granite cutting today is going to talk about the guide for the cutting edge of diamond saw blades, hoping to help everyone.
1. The manufacturer of diamond segment for granite cutting tells you that most of the diamond saw blade heads are installed in a mold and compacted and sintered. Each mold can produce up to 16 heads at a time, and each saw blade requires a number of heads. Ten or even hundreds of them. Therefore, the size of the blade of each saw blade cannot be exactly the same. The diamond segment for granite cutting manufacturer tells you that the size and height of the blade will directly affect the diameter jump of the saw blade. And it affects the cutting quality and efficiency of the saw blade, please be sure to sharpen it.
2. The diamond particles are wrapped by the bonding agent, that is, the carcass. It is difficult to work without exposing the particles, especially difficult to work normally, so the edge must be sharpened.
3. The manufacturer of diamond segment for granite cutting tells you that before installing the diamond saw blade, it is best to use mechanical blade cutting on the blade cutting machine, which can save your time and ensure the quality of the blade and the integrity of the internal quality indicators of the saw blade.
4. The manufacturer of diamond segment for granite cutting tells you that after installation, the cutter head that has not been sharpened should be sharpened with a strong abrasive material such as refractory brick or soft sand before the formal use. The manufacturer of diamond segment for granite cutting tells you to cut it generally After a few cuts, the diamond blade will be exposed, so that the diamond saw blade can be abraded and slipped during use. It can also be repaired again by means of refractory bricks.
Scan the QR code to read on your phone
- Business consulting
- Online Message
- Consultation telephone 008615879981540
- Back to the top

WeChat official account

Mobile phone QR code
Tel: 86 15179308190
Fax: 86 0793-5226507
Email: andy@chinaxinguang.com
Address: Industrial Park, tianfanjie Town, Poyang County, Jiangxi Province
Copyright: Jiangxi Xinguang Diamond Tools Co., Ltd
Gan ICP Bei no.12002000
This website supports IPv4 / IPv6 accessebsite construction: 300.cn-Nanchang