diamond segment for multi 6.5 The manufacturer tells you that cutting granite was very laborious in the past. Since the diamond cord, this job has become especially simple. We try to use the diamond cord to make the diamond wire saw better cut granite plates, but we We should pay attention to some problems when using diamond wire saw to cut, so as to make our work better.

diamond segment for multi 6.5 The manufacturer tells you that compared with ordinary wire saws, diamond wire saws are more suitable for sawing sheets of multiple specifications and different thicknesses, and are suitable for processing more expensive granite. The following requirements must be followed when using a diamond wire saw to cut granite slabs:
1. The diamond segment for multi 6.5 manufacturer tells you that the blocks are shaped at the top and bottom before cutting;
2. The diamond segment for multi 6.5 manufacturer tells you that the blocks should be placed on two supports and fixed with cement;
3. The diamond segment for multi 6.5 manufacturer tells you that the saw rope usually does not need to be edged. In sawing, a reasonable feed speed needs to be determined, which is determined by the suitable curvature of the wire rope during the cutting process, and is usually controlled and adjusted by the control cabinet according to the feedback signal.